Fire Rated System Design – UL U Firecode® C Panels – 1/2″ (UL Type C) · USG Sheetrock® Brand Mold Tough® Firecode® C Panels – 1/2″ (UL Type C). Gypsum Board – Two layers of 1/2 in. or 5/8 in. thick gypsum board applied horizontally or vertically. USG Sheetrock® Brand Gypsum Panels AR Firecode® X. Find UL Design U – 1, 2, 3 or 4 Hour Wall Assembly with a complete list of qualifying products on BuildSite. Download product data and MSDS here.
|Published (Last):||21 May 2005|
|PDF File Size:||8.85 Mb|
|ePub File Size:||15.30 Mb|
|Price:||Free* [*Free Regsitration Required]|
OC in the field when panels are applied vertically.
Not for use ul u419 Item 5A and 5E. Steel Studs — Channel shaped, fabricated from min 25 MSG corrosion-protected steel, min depth as indicated under Item 5, spaced a max of 24 in. Ul u419 Application – The gypsum board is to be installed on each side of the studs with ul u419 in. Items 2 through 2O No. Attached to studs with flat-head self-drilling tapping screws with a min. Horizontal edge joints and horizontal butt joints in adjacent layers multilayer systems staggered a min of 12 in.
Furring channels are friction fitted into clips. Attached ul u419 studs with flat-head self-drilling tapping screws with a min. For use with Items 1 and 2 only. Gypsum board attached to resilient channels as described in Item 5. Horizontal Application – The gypsum board is to be installed on each side of the studs with 1 in.
In addition, ul u419 reprinted material must include a copyright notice in the following format: The thickness and number of layers for the 1 hr, 2 hr, 3 hr and 4 hr 4u19 are as follows: Gypsum board attached to resilient channels as described in Item 5. OC perpendicular to studs. Lead batten strips to have a purity of Studs ul u419 into floor and ceiling runners.
The Guide Information includes specifics concerning alternate materials and alternate methods of construction. The thickness and number of ul u419 u4419 the 2 hr, 3 hr and 4 hr ratings are as follows: Paper tape, nom 2 in. Two layers of gypsum board attached to furring channels as ul u419 in Item 5.
UL U419 or ULC W453
Furring Channels — Optional, Not Shown, for single or double layer systems — Resilient furring channels fabricated from min 25 MSG corrosion-protected steel, spaced vertically a max of 24 in. Lead batten strips to have a purity of Gypsum boards are to be ul u419 to the top and bottom ul u419 with screws spaced 8 in.
Batts and Blankets placed in stud cavity as described in Item 5.
First layer- 1 in. Not for use with Item 5A. Fasteners shall not penetrate through both the stud and the track at the same time. Ul u419 edge ul u419 and horizontal butt joints in adjacent layers multilayer systems need not be staggered. Required behind vertical joints.
U – BXUV.U – UL Product Spec
Secured as described in Item 6. Lead batten strips required behind vertical joints of lead backed gypsum wallboard Item 5B and optional at remaining stud locations.
OC starting 6 in. Lead batten strips required behind vertical joints of lead backed gypsum wallboard and optional at remaining stud locations. Type S-8 pan head steel screw at the top of the strip. Ul u419 required at each location where a screw that secures the gypsum boards, Item 5E will penetrate the steel stud.
Vertical joints centered over studs and staggered min 1 stud ul u419 on opposite sides of studs. Lead tabs may be held in place with standard adhesive tape if necessary.
OC, and perpendicular to studs. For ul u419 with Ul u419 1 and 2 only.